Change the Server IP Address

  1. Use a user account with administrative privileges to log on to Windows.

  2. Stop the RICOH Streamline NX service.

For details about stopping a service, refer to Stop and Restart Services.

  1. Select [Control Panel] → [Network and Sharing Center] to open the configuration screen.

  2. Click the interface name of the connection displayed in the [View your active networks] area.

  3. Click [Properties].

  4. Select [Internet Protocol Version 4 (TCP/IPv4)], and then click [Properties].

  5. Configure the IP address, subnet mask, default gateway, and other settings and click (OK).

  6. Click (OK) to close the Properties screen.

  7. Display the server manager and check that the IP address of the local server is changed to the new IP address.

  8. Start the RICOH Streamline NX service. For details about starting a service, refer to Stop and Restart Services.

After changing the IP address of the Core Server, change the IP address of the connecting Core Server on all Delegation Servers. Also, after changing the IP address of the Delegation Servers, change the IP address of the connecting Delegation Servers to all MIE Servers. Follow the procedure below.

  1. Log on to the Delegation Server or MIE Server for which the connecting server's IP address is to be changed.

  2. In Windows, open [Control Panel] → [Program and functions], select [RICOH Streamline NX], and then click [Change].

  3. Change the IP address of the connecting Core Server or Delegation Server using Installation Wizard.

  4. Finish Installation Wizard.

Please note the following.

  • To enable SNMP traps of the device after changing the IP address of the Delegation Server, apply a device preferences template that enables [Enable SNMP Traps for SLNX] to the devices via configuration task. The setting items in the template are displayed when you navigate to [Configuration] → [Standard Device Preferences] → [SNMP].

  • To resume collecting logs of the target device after changing the IP address of the Delegation Server, use the Log Collection template.